6
www.printek.com
|
P:
888.211.3400
|
F:
269.
222.1229
|
E:
C. Battery Installation
Disposal
Please
dispose
the
batteries
separately
and
free
of
cost
at
your
sales
agency
or
the
designated
local
collecting
points.
Therefore
please
consider
the
national
recycling
standards!
Disassembly
and
removal
of
the
batteries
are
described
in
the
User
Guide.
D. Charge Battery
Uncover the printer ports and plug in your AC power adapter to the Power port (must be a Dascom-
supplied accessory). The yellow LED will show solid ON while the printer battery is charging.
NOTE: Charge via USB is not supported, please do not charge via the USB-C port.
E. Power On
Depress the Power button on the control panel. The green LED and the red LED will both be lit while
the printer is going through its startup sequence (about 20 seconds). The red LED will go off, leaving
the green LED on to indicate the printer is ready to print.
When battery volume goes below 5%, the printer will shut down itself. When it’s below 10%, it will
flash yello LED as an alarm of low battery.
Press
button
to
see
battery
charge
level.
4LED
100%
charge
3LED
75%
2LED
50%
Remove
the
two
screw
and
remove
the
battery.
