Printek FieldPro DP-581, Operator'S Manual

Page: 29 / 35

26
www.printek.com | P: 888.211.3400 | F: 269. 222.1229 | E: info@printek.com
Problem Possible Cause Solution
Poor print quality. Low battery Check and recharge battery.
Print head dirty Clean print head. Refer to
“
Maintenance ” section of this
document.
Poor quality or “old” paper Verify paper from approved
source. Try new roll of
paper.
Paper not feeding. Obstruction in paper path, or
paper improperly installed Check paper path and
reinstall paper (see “
Quick
Start Instructions ”).
Poor quality paper Verify paper from approved
source.
Paper Door not fully closed Verify door is closed.
Paper does not advance to
black mark reliably. Dirty Black Mark/Paper
Sensor Clean Sensor as described
in “
Maintenance ” section of
this document.
Black Mark density/contrast Adjust Mark Sensitivity as
described in Device Settings
Menu .
Paper not feeding reliably or
print is compressed vertically Poor quality paper Verify paper from approved
source.
Heavy or thick forms;
specialty paper with slick
finish Lower the Max Paper Speed
as described in Device
Config Menu .
Paper Door not fully closed Verify door is closed.
Print Garbled. Low Battery Check and recharge battery.
Improper Interface
configuration Verify printer and host
settings match.
Paper Door not fully closed Verify door is closed.
Printer will not print. Low Battery Check and recharge battery.
Paper not loaded correctly Check paper path and
reinstall paper (see “
Quick
Start Instructions ”).
Improper Interface
configuration Verify printer and host
settings match. Print a self-
test to verify printer settings
and to verify printer is
functioning properly.
D. Obtaining Service
If service is required for your printer, please contact the company where you purchased your printer.
If they are unable to assist you, contact Printek Customer Service at (800) 368-4636 to obtain a
Return Authorization Number. Printers without Return Authorization will not be accepted.