625-MFY Rapid Steamer
Connection of Two Steamers
355 East Kehoe Blvd.
l
Carol Stream, IL 60188
Tel: (630) 462-8800
l
Fax: (630) 462-1460
Toll Free: 1-800-PCASTLE
www.princecastle.com
For stores that want to install two steamers, they will need
to use the T-Connect Kit. The T-Connect Kit connects the
inlet water line to both the steamers.
1
Connect the shorter end of T-Connect to the
steamer whose regulator is closest to the
inlet water line. T-Connect’s female end to
steamer’s male end.
Printed in December 2003
Prince Castle Inc.
625-514 revB
4
Finally, connect the inlet water line’s female end to
the T-Connect’s male fitting. The two steamers
have been connected to the inlet water line. Set
both steamers’ regulators to 25 psi.
To Steamer Closest
to Inlet Water Line
To Steamer Farthest
From Inlet Water Line
To Inlet Water Line
3
Connect the longer end of T-Connect to the
steamer whose regulator is farthest from the
inlet water line. T-Connect’s female end to
steamer’s male end.
2
Place the long end of the T-Connect tubing in
between the two steamers.
