Air X
Owner’s Manual
1)
SAVE THESE INSTRUCTIONS. This manual contains important instructions that must
be followed during assembly, installation and maintenance.
2)
Read, understand and respect all warnings.
3)
Do not install Air X on a windy day.
4)
If unusual
or operation is experienced, turn off
machine and perform an inspection.
5)
During assembly and installation properly torque all fasteners.
6)
Use only proper grounding techniques as established by the NEC.
7)
Properly complete and return the Warranty Registration Card.
8)
Air X must be installed in accordance with this manual and local and national build-
ing codes. Failure to comply with this manual and local codes may affect and possibly
void your warranty.
9)
Rotating blades are a serious mechanical hazard. Install Air X so no one can come into
contact with blades.
10)
Observe wire size and fuse recommendations listed in the Wiring Section of this manual.
TIP:
Indicates instruction or advice
that may simplify or ease task or
operation.
IMPORTANT:
Indicates instruction
or advice that is critical for correct
assembly or operation. Damage
to equipment may result if not
heeded.
In this manual you will see the
following icons:
One - Important Safety Instructions
REAd ThESE INSTRuCTIONS IN ThEIR ENTIRETy bEfORE ASSEMblINg, INSTAllINg OR OPERATINg yOuR AIR
lANd uSE:
Specific to Land Use.
MARINE uSE:
Specific to Marine
Use.
WARNINg:
Indicates risk of severe
injury or death or possible severe
damage to equipment - proceed
with caution and follow instructions.
Review this manual to verify that proper assembly and installation procedures have been
followed. Contact Primus Wind Power for further assistance.
sound
the
X
