INTRODUCTION & SPECIFICATIONS
Congratulations, and thank you for your purchase of the Station View
™
controller. This manual explains the
features and operations of the Station View
™
controller which was designed specifically for wastewater pump
stations. It can be configured to use a level transducer with two (2) back up float switches, or with four (4) float
switches without a level transducer.
GENERAL
Duplex pump controller.
4-20mA transducer with (optional) 2 back up floats (High + low)
Or 4 float Switches (Stop/Start/Lag/High level)
Pump amps monitoring
Pump flow monitoring (with level transducer)
Pump HOA selector switch in AUTO monitoring
Power loss monitoring
Graphic display with easy navigation and intuitive setup.
LCD backlit display. 128x64 pixels
Real Time clock
CONTROLLER FEATURES
Level/flow monitoring
Pump level in feet + bar graph
Float switch status indication (when using float switches)
Pump GPM. (using volumetric calculation with level transducer)
PUMP CONTROL AND PROTECTION
Automatic pump alternation
Alternation can be forced to start a particular pump first every time
Pump dry run protection (based on motor Amps + timer)
Pump run indication
Pump Amp indication (with current transducer)
SYSTEM
24hrs data log + 7 days of historical data
Volume pumped (with transducer)
Number of starts for each pump
Run time for each pump
Average GPM for each pump (with transducer)
Real time clock
Password protection
Alarm log
Level simulation (with level transducer)
ELECTRICAL SPECIFICATIONS
10 Digital inputs
2 analog inputs (4-20mA)
8 digital outputs (6 relay + 2 transistors)
24Vdc power, 5.2W
COMMUNICATION
SCADA compatible
Serial port: RS 485 Modbus RTU slave
Optional cellular remote monitoring (
PRIMEX
®
PUMP WATCH
™
)
CERTIFICATION
UL /CE listed
POWER UP SCREEN & REVISION
®
PRIMEX
®
1 Station View
™
Controller User Manual
