The SP6R-LSC Duplex Lift Station Controller monitors the level in the wet well and controls the
operation of one or two pumps.
In addition, it also monitors the pump run, pump seal failure and pump over temperature status. The con-
troller has a built in alternator, run time meters, cycle counters and a level simulator. Level can be moni-
tored via a submersible transducer or any other 4-20 mA device. The controller can be configured for
pump down or pump up applications.
SP6R-LSC LEVEL CONTROLLER INTRODUCTION
The
standard SP6R-LSC
lift station controller kit contains (see
Figure 2
on
page 5
of this manual):
• one SP6R-LSC lift station controller
• two mounting brackets for panel mounting
• a two pin power supply connector block
• a five pin transducer connector block
• two 6 pin relay output connector blocks
• a 12 pin pump status input connector block
The
SP6R-LSC-N4X
version includes a controller mounted in a
NEMA 4X
enclosure. These units are
ideal for replacing float switch or “bubbler” control systems.
PRIMEX™ 3 SP6R-LSC Level Controller User Manual
