(A) optional 4" x 4" junction box
(B) 4 #10 screws and anchors. Refer to Dimension G/H Tilt bracket and surface mounting dimensions [8].
(C) Position top of device on the top two brackets posts and slide down and snap to bottom bracket (D).
(E) Wire dressing exit (top and bottom)
2. Apply power to the clock.
Upon applying power to the digital clock/timer or when pressing the Reset button located in the setting panel, the clock
initiates its power up sequence as described below.
1. All 8 LED segments display 8’s with a red dot on the bottom right of each of the two hour digits and one at the
second or last minute digit.
2. All LED segments display dashes and then dashes with a colon between the hours and minutes.
3. Once the clock/timer receives a signal from the Transmitter, the LED segments display the time received from the
Transmitter and a flashing red dot appears at the bottom right of the second hour digit for three minutes.
Page 18
Summary of Contents for OneVue Levo Series
Page 10: ...Page 10...
Page 15: ...Page 15...
