48
Chapter 4 Installing Options
4
Install a SFP module to FC Pass-Thru Blade.
Insert to the back of the slot while keeping
the SFP module lever raised.
Connect it to the port whose number is the
same as that of the server blade slot to be
connected via Fibre Channel.
For users using the 2 Gbit/s FC I/O Module (PG-FCD101) the SFP module is supplied
with the expansion board, for all other users the SFP module is sold separate.
5
Remove the cap of the SFP module and connect the Fibre Channel cable.
Be sure to install with the lever raised. If the lever is raised after inserting the SFP
module with the lever down, the lock is unlocked and the SFP module becomes loose.
Check that the Fibre Channel cable connector is inserted firmly to the back of the slot.
SFP module
[Port number]
1
3
5
7
9
2
4
6
8
10
Lever