60
Printing from a Mac
2. Add a New Custom Paper Size. Click the plus (+) button to
add a new custom paper size. Enter the size on the right. Be
sure to adjust the top, bottom, left and right margins to 0.
Change the name from "untitled" to the size of your custom
page (W x H).
F. ADJUSTING PRINT ALIGNMENT
If your previous experience with printing is limited to printing
letters and cards to 8.5 inch by 11 inch paper you probably are
not familiar with an essential part of label printing – Print
Alignment. Standard printers feed a sheet and start printing
based on the start of the sheet. They also prohibit printing to
the edge of the sheet. This is to avoid any need for alignment.
The LX910 senses the beginning of the label with an optical
edge. Because of this it is necessary to align the printer to work
with specific types of label stock.
The LX910 comes from the factory calibrated to print exactly to
the edge of Primera label stock. However, due to variables it
may be necessary to fine tune these settings at the beginning of
each roll. This is especially true for other non-Primera brand
label stock.
Important Note:
Before adjusting alignment settings first print one label at
the quality level you intend for the entire print job. This will ensure
the label stock is moving at the same speed and the stock sensor will
sense the gap in the same way.
INDEX
TOC
