Primera Impressa IP60 User Manual Download

Page: 7 / 49

D. IDENTIFYING THE PARTS

This illustration shows the front of the printer with its LED

indicator lights.

The

Power LED

will illuminate when the printer is plugged in

and switched on.
The

Ink LED

will illuminate when the ink cartridge is low or

not installed.
The

Paper LED

will illuminate when the media is not installed

or is empty.
The

Error LED

will illuminate when there is an error that

requires viewing in the Primera PrintHub software. Open the

software to view the error message.
The

Cut Waste Bin

holds all of the strips cut from between

photos. Empty it when you change the paper.
The

Photo Tray

should be used for 4x6 or 2x6 photos.

The

Top Cover

can be opened to access/change the photo

paper and ink cartridge.

Getting Started 3

Photo Tray

Cut Waste Bin

Power, Ink,

Paper, Error LEDs

Top Cover

INDEX

TOC

Summary of Contents for Impressa IP60

















































Search results

Summary of Contents for Impressa IP60

Reviews:

Related manuals for Impressa IP60

Brands by name

Popular brands

Primera Impressa IP60, User Manual

Search results

Summary of Contents for Impressa IP60

Reviews:

Related manuals for Impressa IP60

Brands by name

Popular brands