Printing from a PC
29
•
Color Matching.
The color matching options should
generally be set to match the currently-installed photo
paper. The default option is ICC (International Color
Consortium) Auto Select which will automatically read the
currently- installed paper and set the color matching to
that setting. If you do not like the look of the photo being
printed, you may change to any of the listed options.
There are six options:
o None – No color matching is used
o Vivid Photos - Non-ICC color matching option which
uses more ink but may provide a more vibrant print
than ICC modes.
o ICC Auto Select - Auto selects based on currently-
installed paper
o ICC - Glossy – Profile matched to Primera Glossy
paper
o ICC - Luster – Profile matched to Primera Luster paper
o ICC Repositionable Luster - Profile matched to Primera
Repositionable Luster paper
•
Ink Saturation.
The ink saturation can be adjusted to
lighten or darken a photo without changing the quality/
speed of the print. The default is 85%.
•
Rotate 180 Degrees.
Set to "Yes" to print portrait photos
right-side-up when viewing the printer from the front.
•
Enable Bi-di Printing.
Set to "Yes" to print during both
right and left movements of the print cartridge. "Yes" will
print fastest. Set to "No" to possibly increase quality. "No"
will print slower.
•
Launch PrintHub.
Click this setting to open PrintHub.
•
Details.
Click this setting to view the driver version,
firmware version, total printed photos on the printer, view
various printer calibration settings, and view or reset the
print counter.
INDEX
TOC
