6 Getting Started
E. INSTALLING/REMOVING THE PHOTO TRAY
• The photo tray is used to hold 4x6 or 2x6 photos after
printing.
• If you are printing larger photos, remove the photo tray to
prevent feed and cut problems.
To remove the photo tray, lift up until the pegs are clear of the
waste cut bin and then pull out. You may have to hold down
the cut waste bin in order to remove the photo tray since the
photo tray snaps into place.
To install the photo tray, first make sure the cut waste bin is
installed, then lower the tray until the pegs are secured behind
the front lip of the cut waste bin. The pegs will snap into
place.
Click
INDEX
TOC
