Printing from a PC
31
•
Strip Size.
This value adjusts the size of the strip cut from
between photos. Increase the size to reduce curling of the
strips, if necessary, to allow them to stack neatly and pack
tightly in the cut waste bin. Reduce the size to reduce the
amount of photo paper wasted per print. The default size
is .12".
You may have to make several adjustments to one or more of
these values. After each adjustment you can click the Test
Alignment button to print a small test pattern on the photo.
This will help you enter the correct alignment value.
Finally, it is also possible to remove white space around the
photo by increasing the overbleed in Print Setup right before
printing when printing from Primera Snap. However, it is best
to overbleed as little as possible to avoid ink waste and to
minimize the rate at which ink is collected by the air filtration
system.
INDEX
TOC
