Primera III User Manual Download

Page: 40 / 68

30 Using the CD Color Printer III with Macintosh

Print Quality

Select the appropriate print quality option for your image. Keep

in mind that

Fast 600

provides the lowest quality but fastest

print, and that

Photo 1200

provides the highest quality but

slowest print. You may wish to experiment with these options to

see which one is best for your particular CD label.

Dither Mode

Select this option to choose the appropriate dither mode for

your image. Select

Best For Photos

if printing a design

primarily composed of photographic images. Select

Best For

Graphics

if mainly printing text, lines, and graphics.

Color Matching

Click on the Color Matching box and choose the color matching

option thats right for you. Select

None

if you are more

interested in print speed rather than print color, if you have

already color corrected your image for printing, or if you are

using some other third party color matching software.
Select

Algebraic

if you would like the printer driver to make

very simple color balance adjustments. This option gives you

more natural looking images without actually utilizing any

specific color matching software.
Select

PrimaColor

to enable color matching profiles written

specifically for the CD Color Printer III. The PrimaColor by

Candela Color Management System automatically adjusts the

color of your image according to preconfigured printer profiles

and default system profiles. This results in a very precise color

match compliant with ICC standards.
Select

ColorSync

to perform a ColorSync match on the image

to be printed. This option enables ColorSync to color correct

your image according to preset printer profiles and the selected

system profile. A default system profile is installed into the

ColorSync Preferences folder. For best results, however, it is

recommended that you use the specific profile for your monitor.

To select this profile, select

Control Panels

from the Apple

menu, and double-click on

ColorSync System Profile.

Then,

click on the

Set Profile

button, and select the specific profile

for your monitor. If you cannot find your monitors profile,

select the default system profile called

Default CD Monitor.

Click on the

Select

button. The profile is now selected.

510171Pr5.qxd 5/2/2000 3:39 PM Page 30

Summary of Contents for III




































































Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands

Primera III, User Manual

Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands