Primera III User Manual Download

Page: 36 / 68

26 Using the CD Color Printer III with Macintosh

Section 4:

Using the CD Color

Printer III with Macintosh

A. CONNECTING THE PRINTER TO YOUR COMPUTER

The CD Color Printer III is designed to be used with any Apple

Macintosh supporting Color QuickDraw and running system

software 7.0 or higher. For best performance, a Macintosh with

a 68040 processor and 8MB of RAM (or higher) or a

PowerPC with 8MB of RAM (or higher) is recommended.

The printer driver is accelerated for use with a PowerPC/G3.
The printer is equipped with a high-speed serial port. This port

is the means through which the printer receives data from your

computer. This port is not AppleTalk compatible. To connect

the printer to your computer, simply obtain a standard serial

cable with an 8 pin mini-DIN connection on each end, and

refer to the following steps:
1. Connect one end of the serial cable to the printer.

2. Connect the other end of the cable to either the Printer or

Modem port of your Macintosh.

NOTE:

If your Macintosh does not have a high-speed

serial port

(Printer or

Modem Port) but has a USB port, then you must purchase a USB-to-

parallel port cable adapter. One end connects to the USB bus of your

computer, and the other to the parallel connector of the printer.
The printer must be powered up and connected to be displayed in the

Chooser.
MacOS 8.6 or higher is recommended, as well as using Apples

version of USB Print Driver.

510171Pr5.qxd 5/2/2000 3:39 PM Page 26

Summary of Contents for III




































































Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands

Primera III, User Manual

Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands