Primera III User Manual Download

Page: 12 / 68

2 Getting Started

C. IDENTIFYING THE PARTS

This illustration shows the extended CD Tray and all of the

control buttons and LED indicator lights found on the printer.

The

Power Button

turns the printers power ON and OFF.

This button also serves to cancel the current print job if a print

error occurs and to reset the printer for the next print job.
The

CD Tray Button

opens or closes the

CD Tray

for

loading and ejecting CDs.

The

Ink Cartridge Button

positions the Cartridge Carrier for

easy ink cartridge replacement.
The

Power Light

indicates that power is ON. The

Busy

Light

indicates that the printer is printing, processing, or is in

some way busy. Both of these lights can also indicate several

other printer conditions. For complete information on these

lights, please refer to Section 6.

Front Cover

Power Button

Power Light

Busy Light

CD Tray Button

Ink Cartridge Button

CD Tray

510171Pr5.qxd 5/2/2000 3:39 PM Page 2

Summary of Contents for III




































































Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands

Primera III, User Manual

Search results

Summary of Contents for III

Reviews:

Related manuals for III

Brands by name

Popular brands