PrimeArray 4xxx, User Manual

Page: 82 / 208

SmartExtend – Add More NAS Capacity
(b) On the page, it will list all the target volumes found on
the SmartExtend target system. Choose the target
volume to connect to.
(c) Specify the username and password for
authentication. It must be a member of the group
specified in Step 6.(b)
(d) Click the Finish button.
9. On the Volume SmartExtend page, you will see the target
volume listed in the table. It will need about 10-30 seconds
to build the connection, depending on network traffic.
Click the
Refresh hyperlink to refresh the page. The device
name should be SED01, standing for SmartExtend Device
number 01 .
10. Go to the Volume Information page, check if SED01 is in
the Free Disks list. If yes, it means that it is not initialized yet.
Go to the Volume Create page to initialize it.
Now you are done. Repeat the above steps until all
SmartExtend volumes are created ok.
Expanding a SmartExtend RAID-5 Volume
To expand a SmartExtend volume, please open the
administration page of the SmartExtend target system. When
the target volume is connected to the initiator, use the
Volume Expand function to expand the target volume.
Chapter 5
72