PrimeArray 4xxx, User Manual, Page: 40 / 208

Setting the IP Addresses
Exit LAN 1 Menu?
Save/ E dit/Abort
8.
Repeat the above process to configure the other LAN
port.
Configuring the IP addresses using NAStart
You can use the provided utility NAStart to perform the initial
setup of your newly arrived NAS system. The utility designed to
perform a quick set up and put your NAS system online in just a
few minutes. During startup, NAStart begins to discover all the
NAS system on the network. The default server name would be
NASxxxxxxxx, where xxxxxxxx is the last eight digits of the
Ethernet address of LAN1.
1.
Highlight the server you want to configure from the left
hand pane.
2. Click the button on the toolbar
3. Or, right click the server and select Configure…
4. Enter the Server Name , Server Comment , and
Workgroup/Domain Name and select either the
Workgroup mode or Domain mode .
5. Click Next button to go to the next page.
6. Choose the Network Teaming Mode from the pull down
menu. If you are not clear about this feature, continue
with the default value.
7. If you want IP settings to be assigned automatically, click
Obtain IP settings automatically.
Chapter 2
30