PrimeArray 4xxx, User Manual

Page: 63 / 208

NetWare Network Settings
4.6 NetWare Network Settings
NAS system operates in a manner similar to a Novell NetWare
3.12 file server. Setting up your NAS system and shared among
Novell NetWare clients. A share can be mapped to the NAS
system using NetWare clients. You can enable specific local
users or local groups to have access to the share from within
the Administration Homepage.
Server Name: The default NetWare server name is the server
name followed by an underscore and followed by "NW".
Security Policy: The policy that the NAS system used for
authentication.
Frame: Frame types determine how packets of network data
are formatted on different LANs. The default setting is AUTO in
the NAS system.
Internal Network Number: A logical network number that
identifies an individual NetWare server on the LAN.
Configuring NetWare Settings
1. Click
the Enable NetWare Network (NCP Protocol)
checkbox to enable access for NetWare client.
2. The NetWare server name is the original server name
following by a “_NW”. For example, if the server name of
the NAS system is “ABC” then the NetWare server name
will be “ABC_NW”.
3. Click Apply to save the setting.
Chapter 4
53