prime3 5901750505195, Owner'S Manual

Page: 6 / 20

SFD51
TECHNICAL DATA :
ź
Power: 420 W
b) + and - buttons
ź
Power Supply: 220-240 V ~ 50/60 Hz
ź
Sound power LWA: 58 dB
1. Control panel:
a) power button
c) setting mode button (time/temperature)
NOTE: after turning off the appliance, the fan will run for some time to cool its components down. Do not
disconnect the appliance from the power source until the fan is turned off.
d) display
Prepare the products for drying. They should be of good quality, cleaned, without signs of deterioration or
mould. Cut them into smaller pieces so that their fragments are not thicker than 5 mm. Wipe the trays with a
damp cloth; make sure they are clean. Spread the products to be dried on the trays so that they do not occupy
more than ¾ of the surface area, leaving space between the elements and ensuring free air ow.
CONTROL :
2. Ventilation and heating base
OPERATION
3. Trays
ź
Press the power button to turn the appliance on or off
4. Cover
ź
Press the setting mode button to change the drying temperature. The display will show the expected
temperature. The display will start ashing. It is possible to change the expected temperature with the + and
– buttons while the display ashes.
Device is compliant with EU directives: - Low voltage directive (LVD), -
Electromagnetic compatibility (EMC), Device marked CE mark on rating
label.
6