PrimAster PMAB 2025S, Operating Instructions Manual

Page: 21 / 32

19
SPECIFIED CONDITIONS OF USE
The leaf blower has been designed to blow dry leaves and
light garden waste such as dry grass, twigs and dry spruce
and pine needles.
Do not use this product in any other way as stated for
normal use. Not observing general regulations in force
and instructions from this manual does not make the
manufacturer liable for damages.
WARNING
Risk of injury
Never use the machine with a damaged cover or protec-
tive device or without cover or protective devices.
BATTERY
Recharge only with the charger specified by the manuf-
acturer. A charger that is suitable for one type of battery
pack may create a risk of fire when used with another bat-
tery pack.
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Vapours may leak out in case of unauthorised use or
when using a damaged accumulator. Bring fresh air and
seek medical advice if experiencing difficulties. Vapours
may irritate the respiratory system.
WARNING
Risk of fire! Risk of explosion!
Never use damaged, defective or deformed accumulators.
Never open or damage the accumulator or let it fall on the
ground.
Never charge the battery in an environment with acids
and easily flammable materials.
Protect the battery against heat and fire.
Battery to be used at the ambient temperatures between
10°C and +40°C only.
Never put the battery on heaters and do not expose it to
strong sunlight for a long time.
After being subject to heavy load, let the battery cool
down first.
Short circuit - do not bridge the accumulator contacts with
metal parts.
The accumulator must be packaged (plastic bag, box) or
accumulator contacts must be sealed up for accumulator
disposal, transport or storage.
Transporting Lithium Batteries
Lithium-ion batteries are subject to the Dangerous Goods
Legislation requirements.
Transportation of those batteries has to be done in ac-
cordance with local, national and international provisions
and regulations.
The user can transport the batteries by road without
further requirements.
Commercial transport of Lithium-Ion batteries by third
parties is subject to Dangerous Goods regulations. Trans-
port preparation and transport are exclusively to be car-
ried out by appropriately trained persons and the process
has to be accompanied by corresponding experts.
When transporting batteries:: Ensure that battery contact
terminals are protected and insulated to prevent short
circuit. Ensure that battery pack is secured against move-
ment within packaging. Do not transport batteries that
are cracked or leak. Check with forwarding company for
further advice
GB ENGLISH