Z-Chair
www.pridemobility.com
35
V I I I . C A R E A N D M A I N T E N A N C E
Daily Checks
!
With the controller turned off, check the joystick. Make sure it is not bent or damaged and that it returns to the neutral
position when you release it. Check the rubber boot around the base of the joystick for damage. Visually inspect the
boot. Do not handle or try to repair it. See an authorized Pride Provider if there is a problem.
!
Visually inspect the controller cable. Make sure that it is not frayed, cut, or has any wires exposed. See an authorized
Pride Provider if there is a problem.
!
Check for flat spots on solid tires. Flat spots could adversely affect stability.
Weekly Checks
!
Disconnect and inspect the controller from the power base. Look for corrosion. Contact an authorized Pride Provider
if necessary.
!
Ensure that all parts of the controller system are securely fastened to your Z-Chair. Do not overtighten any screws.
!
Calibrate the joystick if a noticeable difference in performance is detected or if the joystick does not operate properly.
To calibrate the joystick, power off the unit, place the joystick in the neutral position, and power the unit back on. If a
problem still exists with your joystick’s performance, contact an authorized Pride Provider.
!
Check the brakes. This test should be carried out on a level surface with at least three feet of clearance around your
Z-Chair.
To check the brakes:
1. Turn on the controller and turn down the speed level of your Z-Chair.
2. After one second, check the battery condition meter. Make sure that it remains on.
3. Slowly push the joystick forward until you hear the electric brakes click. Immediately release the joystick. You must be
able to hear each electrical brake operating within a few seconds of joystick movement. Repeat this test three times,
pushing the joystick backwards, then left, and then right.
Monthly Checks
!
Check for drive tire wear. See an authorized Pride Provider for repair.
!
Check the caster wheels for wear. Replace them as necessary.
!
Check the caster forks for damage or fluttering which indicates that they may need to be adjusted or have the bearings
replaced. See an authorized Pride Provider for repair.
!
Keep your Z-Chair clean and free of foreign material, such as mud, dirt, hair, food, drink, etc.
Yearly Checks
Take your Z-Chair to an authorized Pride Provider for yearly maintenance. This helps ensure that your Z-Chair is function-
ing properly and helps prevent future complications.
Storage
Your Z-Chair should be stored in a dry place, free from temperature extremes. When storing, disconnect the batteries from
the Z-Chair. See VI. “Batteries and Charging.”
WARNING! If you fail to store the unit properly, the frame can rust and the electronics can be
damaged.