manualshive.com logo in svg

Pride Z-Chair, Owner'S Manual

Share
Download
Pride Z-Chair Owner'S Manual Download Page 26

26

www.pridemobility.com

Z-Chair

V I .   B A T T E R I E S   A N D   C H A R G I N G

WARNING! Prevent injury and/or equipment damage! If your off-board battery charger has not

been tested and approved for outdoor use, then do not expose it to adverse or extreme weather

conditions. If the battery charger is exposed to adverse or extreme weather conditions, then it

must be allowed to adjust to the difference in environmental conditions before use indoors. Refer

to the manual supplied with the battery charger for more information.

Figure 23. Battery Charging (Battery Box Installed)

To charge the batteries with the battery box installed on the
power base:
1. Position your Z-Chair next to a standard wall outlet. See fig-

ure 23.

2. Turn off the power to the controller.
3. Plug the off-board charger into the off-board charger socket

on the controller. See figure 23. Refer to VII. “Operation” for
more information.

4. Plug the off-board charger into the wall outlet. See figure 23.

NOTE: If it is a Pride off-board charger, then there are two
LEDs in it. Refer to the supplied charger manual for infor-
mation on LED indications. If it is not a Pride off-board
charger, then follow the instructions supplied by the manu-
facturer.

5. When the batteries are fully charged, unplug the off-board charger from the wall outlet and then from the controller.

To charge the batteries with the battery box removed from the power base:
1. Remove the battery box from the power base. See IV. “Assembly/Disassembly.”

WARNING! Prevent product damage! Do not remove the basket to access the battery box or

battery box charger port.

2. Position the battery box next to a standard wall outlet.
3. Plug the off-board charger into the battery box charger port.

WARNING! Prevent product damage! Use the battery box charging port for battery charging only

after the battery box has been completely removed from the Z-Chair.

4. Plug the off-board charger into the wall outlet.

NOTE: If it is a Pride off-board charger, then there are two LEDs in it. Refer to the supplied charger manual
for information on LED indications. If it is not a Pride off-board charger, then follow the instructions sup-
plied by the manufacturer.

5. When the batteries are fully charged, unplug the off-board charger from the wall outlet and then from the battery box.
6. Reinstall the battery box to the power base.

Summary of Contents for Z-Chair












































Reviews:

No comments

Brands by name

Popular brands

Load more brands