24
www.pridemobility.com
Z-Chair
V . C O M F O R T A D J U S T M E N T S
Elevating Leg Rests
Elevating Leg Rests (ELRs) offer an infinite range of adjust-
ment for the leg angle and a footrest adjustment range of
12–19 in. See figure 21.
To rotate the ELRs:
1. Push in release lever A.
2. Rotate the ELRs.
To adjust the ELR angle:
1. Push down release lever B.
2. Move the leg rest to the desired angle.
To adjust the ELR length:
1. Remove the two adjustment screws from the side of
each leg rest extension.
2. Slide the leg rest up or down to the desired length.
3. Reinstall the two adjustment screws.
Controller Position
You can position the controller for either left-hand or right-
hand use.
WARNING! Do not place the controller
cable so that it can be pinched in the
seat frame or the power base frame.
To change the controller position:
1. Unplug the controller connector from the power base.
2. Cut the wire tie(s) securing the controller cable to the
armrest.
3. Flip up the armrest and loosen the setscrew. See figure
22.
4. Slide the controller out of the armrest.
5. Loosen the setscrew in the other armrest.
6. Place the controller in the other armrest.
7. Tighten the setscrew to secure the controller.
8. Use a wire tie to secure the controller cable to the arm-
rest.
9. Plug the controller connector into the power base.
Figure 22. Controller Position
SETSCREW
ADJUSTMENT
SCREWS
RELEASE LEVER B
Figure 21. Elevating Leg Rests
RELEASE LEVER A
LEG REST
EXTENSION
