Pride Z-Chair Owner'S Manual Download | Manualshive

Page: 32 / 43

background image

32

www.pridemobility.com

Z-Chair

V I I . O P E R A T I O N

Locking/Unlocking the VSI

The VSI has a feature that enables you to lock your Z-Chair to prevent unauthorized use.

To lock the VSI:
1. With the VSI switched on, press and hold the on/off key. After 1 second, the VSI should beep.
2. Release the on/off key.
3. Push the joystick to the full forward position until the VSI beeps.
4. Pull the joystick to the full rearward position until the VSI beeps.
5. Release the joystick. There should be a long beep.
6. The VSI is now locked.

To unlock the VSI:
1. Press the on/off key and power on the VSI. The maximum speed/profile indicator should ripple side to side.
2. Push the joystick to the full forward position until the VSI beeps.
3. Pull the joystick to the full rearward position until the VSI beeps.
4. Release the joystick. There should be a long beep.
5. The VSI is now unlocked.

NOTE: If the above procedure fails to either lock or unlock the VSI, contact an authorized Pride Provider.

Off-board Charger/Programming Socket

You may use an off-board charger to charge the Z-Chair batteries through the 3-pin socket located on the front of the VSI.
If you use an off-board charger, the charger current should not exceed 8 amps. Contact an authorized Pride Provider for
more information.

WARNING! Only chargers with Neutrik NC3MX plugs should be connected to the off-board charger/

programming socket. See an authorized Pride Provider for more information.

NOTE: The socket may also be used for reprogramming the VSI. Contact an authorized Pride Provider for
more information.

NOTE: The off-board charger/programming socket on the controller should be used when charging the bat-
teries with the battery box installed on the power base.

Controller Connector

This connects the VSI to the travel chair’s batteries, motors, and motor brakes.

Sleep Mode

The VSI controller is equipped with a sleep mode feature. Sleep mode is a built-in circuit that automatically shuts off the
main power if the joystick is not moved in any direction for a preset period of time. The battery condition meter lights on the
keypad indicate sleep mode by blinking once every five seconds. To restore power and continue, push the on/off key
twice.

«
...
30
31
32
33
34
...
»

Summary of Contents for Z-Chair












































Reviews:

No comments

Related manuals for Z-Chair

Brand: panthera Pages: 2

Brand: Accora Pages: 3

Brand: AAT Pages: 36

Brand: AAT Pages: 64

Brand: Felco Pages: 20

trotter TR 1200

Brand: Drive Medical Pages: 6

Brand: CB2 Pages: 4

Brand: Pressalit Care Pages: 10

Synergy Shape Back

Brand: Quantum Rehab Pages: 20

Empulse StreetJet

Brand: Sunrise Medical Pages: 32

Brand: 1800Wheelchair Pages: 14

multichair 4000

Brand: Nuprodx Pages: 9

Brand: Z-Tec Pages: 9

Brand: Jay Pages: 20

Brand: EZee Life Pages: 6

Brand: Spencer Pages: 12

Brand: Rompa Pages: 18

Brand: Karma Pages: 60

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands