Pride Jazzy 600 Series Owner'S Manual Download

Page: 4 / 55

www.pridemobility.com

Jazzy 600

I . I N T R O D U C T I O N

SAFETY

WELCOME to Pride Mobility Products Corporation (Pride). The power chair you have purchased combines state-of-

the-art components with

safety

, comfort, and styling in mind. We are confident that these design features will provide you

with the conveniences you expect during your daily activities. Once you understand how to

safely

operate and care for

your power chair, it should give you years of trouble free operation and service.

Read

and

follow

all instructions, warnings, and notes in this manual before attempting to operate your power chair for the

first time. In addition, your

safety

depends upon you, as well as your provider, caretaker, or healthcare professional in

using good judgement.

If there is any information in this manual which you do not understand, or if you require additional assistance for setup or

operation, please contact your authorized Pride Provider.

Failure to follow the instructions in this manual and those

located on your power chair can lead to personal injury and/or damage to the power chair, including voiding the

warranty.

PURCHASERS AGREEMENT

By accepting delivery of this product, you promise that you will not change, alter, or modify this product or remove or

render inoperable or unsafe any guards, shields, or other safety features of this product; fail, refuse, or neglect to install any

retrofit kits from time to time provided by Pride to enhance or preserve the safe use of this product.

INFORMATION EXCHANGE

We want to hear your questions, comments, and suggestions about this manual. We would also like to hear about the safety

and reliability of your new power chair, and about the service you received from your authorized Pride Provider.

Please notify us of any change of address, so we can keep you apprised of important information about safety, new

products, and new options that can increase your ability to use and enjoy your power chair. Please feel free to contact us

at the address below:

Pride Mobility Products Corporation

Attn: Customer Care Department

182 Susquehanna Avenue

Exeter, PA 18643-2694

[email protected]

800-424-8205

Summary of Contents for Jazzy 600 Series
























































Search results

Summary of Contents for Jazzy 600 Series

Reviews:

Related manuals for Jazzy 600 Series

Brands by name

Popular brands

Pride Jazzy 600 Series, Owner'S Manual

Search results

Summary of Contents for Jazzy 600 Series

Reviews:

Related manuals for Jazzy 600 Series

Brands by name

Popular brands