16
Mobility Products. Ltd.
www.pridemobility.co.uk
X.
Power Module
1.
Turn off power to the joystick.
2.
Ensure the unit is in drive mode.
Tools Required:
- Phillips Screwdriver
3.
Remove the rear electronics door.
See Section I.
4.
Remove the 2 screws that secure the power module to
the frame.
5.
One at a time, disconnect the motor, power, bus, and
PTO/run plug harnesses and connect them to the replace-
ment power module.
6.
Reverse steps 3 and 4 to complete installation.
VR2
Left Motor
Right Motor
Power/Battery
Tilt & Recline
Actuators
PTO
Bus Ca
b
le
Harness removal and installation
VR2
Power Module Hardware removal and installation
1
