26
www.pridemobility.com
Litestream XF
I V . C O M F O R T A D J U S T M E N T S
Drop-in Armrest Removal
The drop-in armrests can be removed to aid in trans-
fers or transporting your wheelchair.
To remove the armrest:
1. Squeeze the armrest latch. See figure 31.
2. Pull the armrest up.
3. Repeat for the other side if necessary.
WARNING! Use care when operating.
Possible pinch point created during
operation.
Drop-in Armrest Height Adjustment
You can adjust the drop-in armrest height to five posi-
tions in 1-in. (2.54-cm) increments.
To adjust the drop-in armrest:
1. Pull back the release lever located on the armrest.
See figure 32.
2. Move the armrest up or down.
3. Release the release lever.
4. Make sure the armrest locks into place.
5. Repeat for the other side if necessary.
Flip-up Armrest Height Adjustment
You can adjust both the locking and non-locking flip-
up armrest height to eight positions in 1-in. (2.54-cm)
increments.
To adjust the flip-up armrest height:
1. Remove the armrest height adjustment screws. See
figure 33.
2. Move the armrest up or down.
3. Reinstall the armrest height adjustment screws.
4. Repeat for the other side if necessary.
Flip-up Armrest Angle Adjustment
You can adjust both the latching and non-latching flip-
up armrest angle.
To adjust the non-locking flip-up armrest angle:
1. Flip up the armrest.
2. Turn the adjusting screw to raise or lower the front
of the armrest. See figure 34.
3. Repeat for the other side if necessary.
Figure 31. Drop-in Armrest Removal
ARMREST
LATCH
Figure 32. Drop-in Armrest Height Adjustment
RELEASE
LEVER
Figure 33. Flip-up Armrest Height Adjustment
ARMREST
HEIGHT
ADJUSTMENT
SCREWS
