36
www.pridemobility.com
Litestream XF
A P P E N D I X I - S P E C I F I C A T I O N S
LITESTREAM XF SPECIFICATIONS (WITH DEPTH-ADJUSTABLE SIDE FRAME)
Seat Dimensions:
Width: 14-21 in. in 1-in. (2.54 cm) increments
Depth: 14-20 in. in 1-in (2.54-cm) increments; 4 in. (10.16 cm) in 1 in. (2.54 cm)
increments of depth adjustment
Back Height:
16 - 24 in.
Seat Upholstery:
Adjustable tension
Drive Wheels:
Mags: 20 in. (50.80 cm), 22 in. (55.88 cm), and 24 in. (60.96 cm)
Spoke: 20 in. (50.80 cm), 22 in. (55.88 cm), 24 in. (60.96 cm), 25 in. (63.5 cm), and 26 in.
(66.04 cm)
Caster Wheels:
Solid: 4 in. (10.16 cm), 5 in. (12.70 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
Pneumatic: 6 in. (15.24 cm)
3
and 8 in. (20.32 cm)
Axle Mount:
Quick-release
Caster Fork:
Angle-adjustable, Quick-release, Bolt-on, Frog Legs
TM
Maximum Safe Slope:
5° (8.7%)
Turning Radius:
1
See figure 45.
Overall Size:
1
Length: See figure 45.
Width: See figure 45.
Weight Capacity:
250 lbs./113.4 kg/18 stone
Component Weights:
32 lbs. (14.51 kg) without front riggings
Armrests:
Latching flip-up; Non-latching flip-up
Front Riggings:
Swing-away leg rests, Elevating leg rests, Adjustable foot plates
Wheel Locks:
Push-to-lock; Pull-to-lock; Scissor-lock
Accessories:
Anti-tip wheels
Static Stability Forward
(Wheels Locked)
7.5°
Static Stability Rearward
(Wheels Locked)
8.5°
Wheel Lock Operational Force
2
Left: 60 N Right: 60 N
1
Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.
2
Test results for Litestream XF equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03.
Maximum operating force for hand operated wheel locks is 60N (+ or – ) 10%. Operational force can vary based on tire type,
manufacture, and condition
3
Pneumatic caster wheels are intended for indoor/outdoor use on smooth, level surfaces. Not recommended for use on rugged terrain
as this may cause premature wear and more frequent replacement of the tire..
NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series
EN12183 standards. All specifications subject to change without notice.
