Litestream XF
www.pridemobility.com
27
To adjust the latching flip-up armrest angle:
1. Push the armrest latch toward the front of the
armrest and flip up the armrest until you hear a
click. See figure 11.
2. Remove the adjusting screw. See figure 35.
3. Reinstall the adjusting screw in the desired
position.
4. Repeat for the other side if necessary.
Seat Angle (Dump) Adjustment
The position of the caster wheels affects the angle
(dump) of the seat. By changing the location of the
caster wheel on the fork, you change the seat angle.
See figure 36.
NOTE: You can also adjust the seat angle by raising or
lowering the drive wheel. See “Drive Wheel Position.”
To change the seat angle:
1. Remove the hardware that fastens the caster wheel
to the caster fork.
2. Reposition the caster wheel on the caster fork.
3. Reinstall the hardware that fastens the caster wheel
to the caster fork.
4. Repeat the procedure for the other side, making
sure both caster wheels are adjusted to the same
position.
WARNING! Changing the seat angle
may adversely affect stability and
cause the wheelchair to tip over.
I V . C O M F O R T A D J U S T M E N T S
Figure 34. Non-latching Flip-up Armrest Angle Adjustment
Figure 35. Locking Flip-up Armrest Angle Adjustment
Figure 36. Caster Wheel Position
CASTER
WHEEL
CASTER FORK
ADJUSTING SCREW
ADJUSTING SCREW
