22
www.pridemobility.com
AUS Jazzy 1103 Rev E/Sep02
V I . C O M F O R T A D J U S T M E N T S
Figure 10. Wire Tie Location
USE A WIRE TIE TO SUPPORT
THE CONTROLLER CABLE.
Figure 9. Joystick Extension
LOOSEN THIS SETSCREW TO ADJUST
JOYSTICK
JOYSTICK EXTENSION
The joystick controller can easily slide out away from the armrest, or in toward
the armrest.
To extend the joystick:
1. Use a 3/16-in. hex key to loosen the setscrew.
2. Slide the joystick mounting bracket into or out of the armrest to the
desired position. See figure 9.
3. Retighten the setscrew by turning it clockwise.
JOYSTICK POSITION
You can position the joystick for either left-hand or right-hand use.
To change the joystick position:
1. Disconnect the controller harness connectors.
2. Cut the wire tie that attaches the controller cable to the armrest. See
figure 10.
3. Use a 3/16-in. hex key to loosen the setscrew. See figure 9.
4. Slide the joystick mounting out of the armrest.
5. Loosen the setscrew in the other armrest.
6. Place the joystick bracket in the other armrest.
7. Tighten the setscrew.
8. Connect the controller cable to the armrest with a wire tie. See figure 10.
FOOTREST HEIGHT
The footrest height is easily adjusted to six different heights. See figure 11.
To raise or lower the footrest:
1. Remove the seat and the body shroud. See VII. “Disassembly.”
2. Remove the nut and bolt from the footrest.
3. Raise or lower the footrest to the desired height.
4. Reinstall the nut and bolt into the footrest.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 3/16-in. hex key. See figure 12.
To adjust the footrest angle:
1. Turn the setscrew clockwise to raise the front of the footrest.
2. Turn the setscrew counter clockwise to lower the front of the footrest.
FOOTREST ANGLE ADJUSTMENT
Figure 12. Footrest Adjustment
Figure 11. Footrest Adjustment
FOOTREST HEIGHT ADJUSTMENT
