Pride Mobility Go-Go Travel Lift, Owner'S Manual

Page: 14 / 19

14
Go-Go Travel Lift www.pridemobility.com
I V . O P E R A T I O N
Figure 13. Hand Control
PRESS TO OPERATE LIFT IN
A DOWNWARD DIRECTION PRESS TO OPERATE LIFT
IN AN UPWARD DIRECTION
DOWN UP
Figure 15. Lifting Strap Warning Label
DOCKING DEVICE T-BAR
LIFTING HOOK
Figure 14. Lifting Hook Placement
LIFTING THE SCOOTER
WARNING! Before operating the
Go-Go Travel Lift for the first time,
be absolutely sure you have the
proper docking device for your
scooter.
1. Position your scooter (with the key removed and
the tiller lowered) on the ground behind the in-
stalled lift. Be sure that there is ample space be-
tween the scooter and the vehicle bumper to en-
sure that the scooter will not hit the bumper while
being raised. If the scooter is too far from the
vehicle’s bumper, the scooter will be dragged
when attempting to lift it.
2. Position the boom arm over the scooter.
3. Operate the lift (use the hand control—see fig-
ure 13) in the downward direction until the lift-
ing hook reaches the T-bar. The lift strap should
drop straight down to the T-bar. See figure 14.
WARNING! Inspect the lifting strap
before each use for twisting,
fraying, and signs of wear.
"
Keep tension on the lifting strap with your
free hand when lowering the lifting hook.
"
Lower the lifting hook only to the T-bar of
the docking device.
WARNING! Do not extend the
lifting strap past the warning label
located on it. See figure 15.
4. Place the lifting hook onto the docking device T-
bar. See figure 14.
5. Operate the lift in the upward direction.
WARNING! Pinch/Crush Hazard!
Always keep hands clear of the
lifting strap while the SilverBoom
is lifting/lowering a mobility
device. The operator of the lift
should stand a safe distance away
from the mobility device being
lifted/lowered to ensure that feet
are never positioned under a raised
mobility device.