30
www.pridemobility.com
Blast/Rev F/Feb03
V I I I . O P E R A T I O N
PILOT CONTROLLER
The electronic controller is what you use to operate your power chair. It takes the battery voltage and sends it to the appropriate
system. The electronic controller also enables you to monitor battery charge, electronic controller functions, and the condition
of your electrical system. Also, it may be used to control some optional systems such as power elevating seats and lights.
The Pilot electronic controller is an integral electronic controller. All of the electronics necessary to operate the power chair are
contained in one module. See figure 19.
The Pilot consists of:
1. joystick
2. on/off button
3. battery condition meter
4. speed control knob
5. charger socket
6. controller connector
7. 3-pin charger inhibit connector
Typically, the Pilot is mounted to one of the armrests
and is connected to the motors, batteries, and the
onboard charger at the electronics tray.
Joystick
The joystick controls the direction and speed of your
power chair. When you move the joystick from the
center (neutral) position, the electromagnetic brakes release and allow your power chair to move. The further you push the joystick
from its center position, the faster your power chair moves. When you release the joystick and allow it to return to the center
position, you engage the electromagnetic brakes. This causes your power chair to decelerate and come to a complete stop.
WARNING! If your power chair begins to move in an unexpected manner, immediately release the
joystick. Unless the joystick is damaged, this action should stop your power chair.
On/Off Button
This is a green button located in front of the joystick. It turns the Pilot on and off.
WARNING! Unless faced with an emergency situation, do not use the on/off push button to stop
the chair. This will cause the power chair to stop abruptly.
WARNING! Always turn the power off when you are stationary to prevent unexpected movement.
Battery Condition Meter
The battery condition meter is located immediately in front of the joystick. This is a 10-segment illuminated display that
indicates that the Pilot is turned on and also gives the battery status, the Pilot status, and the electrical system status.
n
Red, yellow, and green lights lit:
Battery charged; Pilot and electrical system OK.
n
Red and yellow lights lit:
Charge battery if possible; Pilot and electrical system OK.
n
Red lights only lit or slow flash:
Charge battery as soon as possible; Pilot and electrical system OK.
2
3
4
1
7
6
5
Figure 19. Pilot Controller
