5
priceindustries.com
|
Web Server - Manual
Web Server
INSTALLATION & MOUNTING INSTRUCTIONS
Mounting
Use the included DIN rail to securely mount the PRTU-Front-
End components.
1. The Price Web Server
MUST
be mounted in an enclosure
2. Using 3 screws (by others) mount the DIN rail horizontally
to a secure, accessible surface.
3. Hang the Price Web Server onto the DIN rail using the
TOP white clips.
4. Using the Price Electronics screwdriver, gently pull down
on the BLACK clip, while pushing gently on the WEB-
SERVER towards the DIN rail. The Price Web Server
should click securely into place.
5. Use the mounting clips on the rear of the BAC-RTR, IP-
RTR, or IP-SWITCH to mount the components to the din
rail. Slip the top clip behind the DIN rail flange, then use
steady pressure to push the component down then back
towards the DIN rail to secure.
6. The same section of DIN rail can be used to mount
multiple components.
FrONT vIeW OF Web-Server MOUNTeD ON DIN rAIL
Page
8
of
32
INSTALLATION AND MOUNTING
PRTU CONTROLLER
To mount the PRTU controller use the included 11” piece of DIN rail.
The PRTU must NOT be installed
outdoors or inside the RTU.
Mount the PRTU in the PLENUM space. Ideally near the main ductwork
discharge/return of the RTU just above the ceiling tiles.
1. Using 3 screws (by others) mount the DIN rail horizontally to a secure, accessible surface
2. Hang the PRTU controller onto the DIN rail using the TOP white clips
3. Using the Price Electronics screwdriver, gently pull down on the BLACK clip, while pushing gently
on the PRTU towards the DIN rail.
4. The PRTU should click securely into place.
5. To remove, repeat above steps in reverse
DIN Rail
Back view of PRTU
Front view of PRTU mounted on DIN Rail
bACK vIeW OF Web-Server
reAr vIeW OF IP-rTr AND bAC-rTr
SAMPLe FrONT-eND MOUNTING ON DIN rAIL
