12
V676
®
CONTROL CONSOLE INSTALLATION & OPERATION MANUAL
Display Setup
Use the following guidelines when connecting displays to the console:
+
For the standard setup, the resolutions and arrangement of the monitors in the display preferences should NOT
need to be changed. Normally, there will be two 1280 x 768 displays. If there is an issue at startup for some
reason, 'Detect Displays' should get the correct information.
+
If an external display is not being used, move the switch on the rack to the external position so the system will
know it is not there (to keep the cursor and windows from going to non-existent displays). Refer to
Figure 9
.
+
There is an LED indicator on the back of the external displays. Indications are as follows:
-
Green indicates a good video signal.
-
Yellow indicates no video.
Using Standard DVI Monitors
If user-supplied DVI monitors are used, these should be connected to the DVI outputs at the rear panel (
Figure 9
).
Installation Guidelines
:
+
Either PRG-provided touchscreen monitors must be used
or
user-supplied monitors must be installed in their
place.
Only one of the outputs will be active.
+
Two connection options are available on the rear panel: DVI or Integrated Cable. The toggle switches enable the
required outputs.
Figure 9: V676 Monitor Connections
Integrated Cable Outputs (2)
DVI
Outputs (2)
Toggle Switches (2) -
Toggles between DVI output or Integrated Cable output
