8
V676
®
CONTROL CONSOLE INSTALLATION & OPERATION MANUAL
Note:
Monitors and/or Channel Select panel are optional. If these components are not included, skip to Step 6.
Note:
The console supports up to two (2) external monitors (optional). This can be two PRG-provided monitors, two
user-provided monitors, or a combination of one each. In any case, only two external monitors should be installed.
Note:
If DVI monitors are to be used instead of PRG-provided monitors, refer to
"Display Setup"
on page 12.
Step
3. At rear of console, install one support arm for each external monitor/panel, as shown in Detail B of
Figure 5
.
Step
4. Slide monitor/panel onto support arm quick-release connectors as shown in Detail A of
Figure 5
.
Figure 5: Installing Channel Select Panel and Monitors on V676 Console (Optional)
Support Arm (3)
Monitor (2)
Channel
DETAIL A
Select
DETAIL B
Quick-
Release
Support Arm
Bracket (2)
Support Arm
Bracket (2)
