V676
®
CONTROL CONSOLE INSTALLATION & OPERATION MANUAL
9
CAUTION:
Power supply plug and/or power switch/circuit breaker shall remain readily operable.
Step
5. Connect monitors and/or Channel Select panel to console, as required (
Figure 6
). Be sure to connect LEMO
connectors as shown.
Step
6. Connect AC Power Cable (supplied) from AC In connector at back of console to AC power source.
Figure 6: Connecting Components to V676 Console
Note:
The console supports up to two (2)
external monitors (optional). This can be two
PRG-provided monitors, two user-provided
monitors, or a combination of one each. In
any case, only two external monitors should
be installed. Note that your particular set-up
may be different than what is shown here.
