TECHNICAL INFORMATION
5 - 5
Preheating system
(optional)
Espar (Eberspächer)
Model D12W
Heating output
41,000 Btu/hr
(12 000 W)
Fuel type
same as engine
Fuel consumption
0.44 U.S. gal./hr
(1,65 l/hr)
Rated voltage
24 ± 4 volts
Electric power consumption 55 watts
Webasto
Model DBW2020
Heating output
80,000 Btu/hr
(23 300 W)
Fuel type
same as engine
Fuel consumption
0.8 U.S. gal./hr
(3 l/hr)
Rated voltage
24 ± 4 volts
Electric power consumption 120 watts
Data Plate
and Certification
Data Plates
The main components of the vehicle such as
engine, transmission, axles and chassis are
identified by different serial numbers. It may be
necessary to locate these numbers for warranty
purposes.
Engine
The engine serial number is stamped on the
cylinder block under the intake manifold (oil filter
side) close to the water pump.
In addition, four plates are located on the rocker
cover (oil filter side). Contents of the plates in-
clude the engine serial numbers and a list of the
optional equipment on the engine. The informa-
tion is primarily used when ordering replacement
parts.
Transmission
TRANSMISSION DATA PLATE
07019
Drive axle
11004
Front axle
10003
Vehicle identification number (V.I.N.)
The vehicle identification number is stamped on a
plate located on a windshield frame pillar (driver's
side), so that is visible from the outside. It is ex-
tremely important to give the correct vehicle
identification number when ordering replacement
parts. Use of this number will prevent delays and
errors in obtaining the correct material.
