8
Step 4: Activating Your Monitor
Once all four leads are properly connected,
sit down.
Remove the
PULL Tab
from the monitor.
Remain
still
for the
first 60 seconds
.
Once the plastic
PULL Tab
is removed, the
monitor emits a single beep and powers on.
Important:
•
If you have accidentally removed the
PULL Tab
before attaching the electrodes, contact Preventice
Services at 888.500.3522 (press 1, 1, 4).
•
You should
NOT
push the Event button unless you feel a symptom.
You will hear a ring tone to confirm the
monitor is powered on correctly.
The monitor will automatically proceed to
the
“Monitoring”
screen indicating the
beginning of your study.
If the screen displays “Battery low Please
recharge”, charge immediately.
60 sec.
1
2
3
4
5
6
