5
Step 1: Preparing your skin
All leads
should be put on
BEFORE
the plastic
PULL Tab
is removed from the monitor. The order of lead
placement is
important
and should be done in the correct order every time the leads are attached.
• If hair is present, remove the hair where you will place the electrodes.
• Thoroughly clean the area with soap and water. Dry the area completely.
• Do not apply lotions or oils.
Snap the electrodes onto the
lead wires.
1
Ensure there are no air
bubbles or creases once the
electrode is placed on skin.
3
Run the lead wires from the
electrodes to the monitor
neatly under your clothing.
Remove the adhesive from
the electrode.
2
4
Warning:
Do not apply the electrodes over open
wounds, lesions, infected or inflamed
areas. Apply the electrodes only to
intact, clean skin.
Patients with known skin allergies or
hypersensitivities to adhesives should
consult their doctor to select the most
appropriate option for their needs.
To request additional or alternative
electrodes:
Call: 888.500.3522 (press 1, 1, 3) or
Email: [email protected]
