9
Fuel and
Oil Supply
• Follow the Safety Warnings for handling fuel
(see page 5).
• Lay down the chainsaw on its side so that the
fuel and oil caps face upwards.
• Wipe clean the surface of the fuel tank cap to
prevent contamination.
• Slowly loosen the fuel tank cap.
• To prevent spilling, use care to pour the fuel
mix into the tank. Follow the
fuel specifications (See page 3).
• Before covering the fuel tank check and wipe
clean the joints.
• Set immediately the fuel tank cap. Hand-tigh-
ten the cap.
• Wipe clean all the fuel spillage.
• Use oil specified for bars, chains and the lubrication
systems, especially formulated to perform in a wide range
of temperatures without the requisite of dilution. (similar
to SAE 15W-40 or SAE 10W-30)
• Add oil per each of fuel tank consumed.
• Do not use dirty, used or contamina-
ted oil. The oil pump, bar or chain may get damaged.
• Lay down the chainsaw on its side so that the fuel and
oil caps face upwards.
• Wipe clean the surface of the oil tank cap to prevent
contamination.
• Slowly loosen the oil tank cap.
• Use care to prevent spillages in the tank.
• Before covering the oil tank check and wipe clean the joints.
• Set immediately the oil tank cap. Tighten by hand.
• Wipe clean all the oil spillage.
Fuel Supply for the motor
Oil Supply for The Bar and Cutting Chain
CAUTION
CAUTION
ENGLISH
Summary of Contents for 27044
Page 22: ...22 ENGLISH Notes ...
Page 27: ...22 ESPAÑOL Notas ...