PRETUL 27044, Manual

Page: 3 / 48

• The chainsaw is built with an air-cooled, 2-stroke motor using unleaded gasoline high quality self-mixing oil with fuel stabilizer
specified for air-cooled 2-stroke motor.
• The motor is certified to function with unleaded gasoline for vehicles with an 87 ([R+M]) octane-rating or higher.
• Do not use any type of pre-mixed gasoline with oil purchased in gas stations, like the one fit for motorcycles.
• DO NOT use automotive oil, nor outboard 2-stroke motor oil.
• The mix ratio shall be 50 parts gasoline per 1 part oil (ratio 50:1). Prepare the mix in a gasoline approved container. Always
mix thoroughly before pouring in the motor tank.
Do not use fuel mix that has been stored more than 15 days. Mix only small amounts.
Never smoke near fuel or the area where gasoline is being filled up nor where the mix with
oil is being prepared or when operating the chain saw.
3
Code
Description
Net Weight (without bar)
Bar Length
Chain Pitch
Chain Gauge
Drive Sprocket Wheel
Motor Cylinder Capacity
Motor Rated Power
Maximum Motor Speed
Chain Speed
Fuel Tank
Oil Tank
Vibration
40 minutes rest per each tank consumed.
Maximum 5 hours daily.
Work Cycle
MOT-6020P
27045
20”
15,2 lb
Chain Saw
0.05”
0.325”
with 7 (0,325”) sprockets
60 cc
12500 RPM
4 330.7 ft/min
19.95 oz
8.79 oz
front handle 3.5 m/s 2
rear handle 7.7 m/s 2
MOT-6018P
27044
14,7 lb
18”
3 HP
Technical data
Fuel requirements
WARNING
CAUTION
Mix
1 liter
1
L
+ =
50:1
proportion
4 capfuls oil
Gasoline
Use the cap of oils ** ACES-2, ACES-5 or ACES-20 as a measure to prepare
the mix. Mix 4 capfuls oil with each liter gasoline.
To make the useful life of the motor las longer use synthetic oil for 2-stroke motors.
* 1 gallon = 3,78 liters ** Not included
A wrong mix can cause the machine to throw-a-rod,
causing costly repairs!
ENGLISH ENGLISH