PRESYS
Instruments
PCON-Y18-LP
Page 16
b) Changing the set point
Press the
SP
button or touch the
Indicated Value
to change the set point to the
desired value. When the pressure is stabilized, its reading value turns to
green
.
Fig. 16
- Control Mode – Changing Set point Value
The state of the output isolation valve is user configurable. To change the state of
the valve, press the
SETTINGS
button shown below and change the
Output
Parameters
(OPEN / CLOSED) in the
ADVANCED
tab.
Fig. 17
- Output Isolation Valve
presys
