PRESYS
Instruments
PCON-Y18-LP
Page 9
2.1. Calibrator Menu
To select the
Pressure Control Module
and the
Auxiliary Input
functions press
the
CALIBRATOR
button from the main menu.
When first entering the
CALIBRATOR
menu, the PCON-Y18-LP executes a
VENT
operation and an
AUTO RESET
of the pressure read in the Pressure Control
Module. When it is done, it goes to
CONTROL
mode. The following screens are
displayed.
Fig. 05
- Calibrator initialization
The Pressure Control Module has three operation modes:
MEASURE
,
VENT
and
CONTROL
(see sections
2.1.2
,
2.1.3
and
2.1.4
). To select an operation mode, press one
of the buttons indicated below. The current state is indicated by the symbol.
Fig. 06
- Pressure Control Module - Operation Modes
presys