10
B.
Set-Up and Operation
1.
Main Display Screen. Press the Power Switch momentarily. The OLED display will
show the Main Display Screen :
2.
Menu Screen Options. Press the
MENU
soft-key; the MENU screen appears.
3.
Select a radio
Channel
to match that of the Motor Driver:
Press the right side of the NAV key to highlight the Channel number. Change to the
desired channel by pressing the top and bottom pads of the Nav key. The antenna icon
and bars indicate the presence and signal strength of MDR3 units on that channel.
4. To reset the
Footage
counter use the Nav key to highlight Footage, and press
Clear
.
Units are changed with the
ft/m
soft key. Change the movement type by pressing the right
side of the Nav key; 4, 3, and 2 perforation pull down are supported.
Lens Selection
Shows focus distance
in digital format
(Lens must be calibrated)
Shows focus knob
setting as bargraph
All functions are accessed through
the Menu key
Focus Ring Letter
footage
Radio Channel
Signal Strength bars
Battery Charge
Main Display Screen
Menu Screen: Channel Selection
