PRESTO
GmbH & Co. KG
Bad Laer
04/2012 5 - 4
5.4.
Hydraulic unit
The hydraulic unit of the channel-type
baling press generates heat that has to be
dissipated by the customer by corresponding
ventilation and/or waste air openings.
If the machine is erected in rooms with a
permanent temperature of more than 30° C
the installation of an oil cooler might be
necessary. Our sales or service department will
be glad to advise you correspondingly.
The assembly "Hydraulic unit" is responsible to
provide the hydraulic pressure which is
required for the compaction of the filled in
material.
The electrically driven hydraulic pump, gear
pump design, provides the hydraulic unit with
the required operating pressure. A valve has
been installed as an overload protection which
protects the hydraulic unit against excessive
pressure.
The assembly "Hydraulic unit" mainly
consists of the following components:
(1) aggregate (hydraulic part)consisting of
the hydraulic pump in the hydraulic tank (2)
and filter unit (3 ), valve block (4) ,
exhauster (5), pressure gauge (6).