PRESTO
GmbH & Co. KG
Bad Laer
04/2012 6 - 16
6.6 Insert binding wire coils
Inserting the lower wire
Loading
the wire containers or the large roller stations with wire.
Master switch ON (
13
)
Selector switch to „Manual“ (
8
)
Press
Operation
button (
9
). System is ready for operation.
Press
Start
button (
1
). Electrical motor and hydraulic pump (
20
) are running.
Pressing ram backwards
(button
3b
). Press and hold button “ram backwards”. Ram
moves backwards until end position (
B31
) is reached and valve is closed.
Needle in threading position:
Pressing ram must be completely retracted; press the
Needle down
button (
4b
). Needle moves down and stops in
Threading position
(only
B34
).
Pulling in the wire
Straight align the wire and pull in.
Threading position
Operating position
Threading example for the lower wire for CCV
1 through the spring winding at the end of the press
2 through the drill bushes at the rear support legs
3 through the needle profile above the needle head
4 pull wire through to the end of the channel