13
Operating Instructions - mobiMASTER and mobiFITT
GB
13. Tests
The owner is responsible for requesting the relevant authority to carry out periodical tests on the fuel tank.
■
■
The tests are required to the scope and at the time periods below:
Test
Interval in years
Leak testing (test pressure 0.2 bar)
2 ½
External examination
2 ½
Internal examination
5
Type of construction and designation
5
NOTE
■
■
The dates of the most recent tests of leakage and condition are to be applied
to the fuel tank permanently.
■
■
The month and the year, e.g. „04/19” are to be stamped in the appropriate
row on the maker‘s plate.
■
■
In addition, a test report is to be written. The owner must retain the reports
for the entire working life of the fuel tank.
■
■
The reports are to be provided with the tank if it is sold.
■
■
In the case of a negative test result, the tank is to be repaired by an
authorised manufacturer.
The following minimum information must exist for each fuel tank:
– Manufacturer‘s designation
– Name of the current owner
– Serial number of the container
– Result of the first acceptance testing and of any leak testing (
a
Chapter 17; table 1).
– Reports on tests carried out every 2 ½ and 5 years (
a
Chapter 17; table 2).
– Damage and repair report (
a
Chapter 18; table 3).
14. Repair/Service
mobiMASTER and mobiFITT were developed and produced according to the highest quality standards.
Should a problem develop, despite all quality controls, please contact our customer service:
PRESSOL Schmiergeräte GmbH
Tel +49 9462 17-216
Fax +49 9462 1063
[email protected]
15. Disposal
The operating company is responsible for the proper disposal of the mobiMASTER and mobiFITT.
Hereby, the industry-specific and local regulations must be observed when disposing the different
materials.
Only qualified personnel is authorized to disassemble and dispose of the mobiMASTER and mobiFITT.
