8
17
Double click on the EASERA GATEWAY Control Panel ICON to open the EASERA GATE-
WAY Hardware Control Panel.
EASERA GATEWAY HARDWARE CONTROL PANEL (Windows XP)
Sample Rate:
Drop down the menu to select the sample rate of the EASERA GATEWAY –
either 44.1, 48, 88.2, 96k. This must be set to the same sample rate in your recording
software.
Note that when the Gateway is used with EASERA, the sample rate can also be set direct-
ly in EASERA.
EASERA GATEWAY MIXER FLOWCHART
To set up your Mixer application for zero latency recording (example):
1. Record enable your desired track – turn off input monitoring function (or mute the track)
in your software.
2.Select playback channels of the main output of your audio software in the SOFTWARE
PLAYBACK channel of the EASERA GATEWAY mixer. The input on this channel will be the
output of your software.
3.Connect your microphone to input 1 and turn on phantom power if needed.
4.You can now adjust the levels of your microphone and your software playback to your
desired levels for recording (monitoring only).
5.If using headphones select “Mix” under Mix to Phones. – this will send the output of the
Mixer to the headphone output.
2 INSTALLATION AND SETUP
4 MIXER
Mixer output to one of six
stereo outputs on EASERA
Gateway
6 inputs from the EASERA
GATEWAY go directly to:
Head
phone output can be any playback stream
from your sof
tware or the mix from the mixer
.
