PRESONUS AudioBox 1818VSL, Owner'S Manual

Page: 33 / 80

27 27
Owner’s Manual
Ov
er
view
Hook
up
Connec
ting
to
a
Comput
er
Tut
orials
Technic
al
Inf
orma
tion
Troubleshooting and
W
arr
an
ty
Sof
tw
ar
e: V
irtual
StudioLiv
e
and S
tudio O
ne A
rtist
Software: Virtual StudioLive and Studio One Artist 4
Sof
tw
ar
e: V
irtual
StudioLiv
e
and S
tudio O
ne A
rtist
27
Limiter On/Off Turns the Limiter for the Selected Channel or Bus On or Off.
When the limiter is engaged, this button will illuminate. The
threshold for the limiter is set to 0 dBFS. The ratio is ∞:1.
The limiter is available for all input and output buses.
Low EQ On/Off Button Activates Control for the Low Band EQ for the Selected Channel or Bus.
This button activates control of the equalizer’s Low band for the selected
channel or bus. The button will illuminate to indicate control is active.
The Low EQ band is available for all input and output buses.
Low EQ Frequency Control Sets the Center Frequency for the Low EQ Band.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 36 to 465 Hz.
Low EQ Gain Control Sets the Gain Attenuation or Boost of the Center Frequency.
This control sets the gain cut or boost at the center
frequency for the Low band. The level of the center
frequency can be set between -15 and +15 dB.
Low Shelf EQ Button Turns On the Low Shelving EQ for the Selected Input or Output Bus.
When the Shelf button is not engaged, the Low band is semi-
parametric. Enabling the Shelf button turns the Low band into
a low shelving EQ that alters, by a fixed amount, a band of low
frequencies at and below a user-selected shelving frequency.
A low shelving EQ is like a bass-control knob on a consumer audio device.
In this mode, the Center Frequency control selects the shelving frequency.
Mid EQ On/Off Button Activates Controls for the Mid EQ for the Selected Input or Bus.
This button activates the controls for the equalizer’s
Mid band for the selected input or output. The button
will illuminate to indicate control is active.
The Mid EQ band is available for all input and output buses.
Mid EQ Frequency Control Sets the Center Frequency of the Mid EQ.
The center frequency is the middle of the passband (the mean) between
the lower and upper cutoff frequencies that define the limits of the band.
You can adjust the center frequency from 380 Hz to 5 kHz.
Virtual StudioLive 4.1